9号彩票官网

浙江FZY烫钻机生产厂家【专业生产20年】主营:全自动烫钻机、钉珠机、自动钉珠机、异形钻排图机

邮箱中文版English

行业动态

当前位置:网站首页 > 资讯中心 > 行业动态

  • 拔染印花对温度有哪些要求?
  • 本站编辑:浙江富知源机械设备有限公司发布日期:2018-06-15 11:30 浏览次数:

 
拔染印花机烘房的温度,一般情况下不得高于100°C,以低温烘干为宜,烘燥温度过高,为降低加工锡的拔染效果。染底不超过120°C,轧底刮底烘干不要超过100°C,低温烘干为宜,烘干过程中不宜中途停机。加工锡对网版、设备的腐蚀性较大,正常情况下,生产5000米,务必检查网版,防止出现砂漏,线条不光洁等。印花机刮刀压力调节要均匀,要打好接版样。拔染糊料一般采用白糊精或合成龙胶,脱糊性比海藻酸钠差,所以使用绳状式水洗机且要加强还原清洗,使布面清爽、色光纯真、花型轮廓分明。
The temperature of the drying room of the printing machine is generally not higher than 100 degrees C. It is suitable for drying at low temperature. The drying temperature is too high, so as to reduce the discharging effect of tin. The bottom should not exceed 120 degrees C, and the bottom should not be dried at 100 degrees C. It is advisable to dry at low temperature. Tin processing is more corrosive to screen and equipment. Under normal circumstances, the production of 5000 meters must check the screen, prevent hourglass, and the lines are not bright and clean. The pressure adjustment of the blade of the printing machine should be uniform. The extraction paste usually uses white dextrin or synthetic dragon glue. The deactivation is worse than sodium alginate. So it is better to use the rope type washing machine and strengthen the reduction cleaning to make the cloth face clear, pure color, and the outline of the flower shape.

服务热线:

微信二维码:

[ 扫一扫 ]
QQ在线沟通:
立即在线沟通
立即在线沟通

浙公网安备 33010902001237号

友情链接:9号彩票官网  9号彩票  9号彩票  9号彩票投注  9号彩票注册  9号彩票  9号彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!